== Cold Start = In cabinet behind driver
- Main breaker to closed
- Isolation switch - to start/stop/isolate
- Prime - press for 10 seconds
- Start - press for 5 seconds
- Isolation switch - to run
- Independent to full
- Automatic brake off (if you don't do this, PCS will set off in next step)
- Cut-off to freight
- MU2A - Lead or dead
- Eng. run, gen. field and control & fuel pump - all on
- Insert reverser
- Reverser to forward
- Selector to 1 (B is for dynamic braking)
- Release independent
- Throttle to idle
- Reverser to neutral
- Auto brake to emergency
- Independent brake to full application
- Wait 60 seconds
- Release auto brake
- PCS light should no longer be on at this point
- Adjust reverser as needed, release independent brake and set off